Aux In (/auxin) data

From behringerwiki
Jump to: navigation, search

Return to FAQ >> General FAQ >> OSC Remote Protocol >> OSC_Remote_Protocol#Server_.E2.86.94_Client_communications


Auxin [01…08] (channel id 32…39)
AuxIn - configuration setup
Path Type Range Units
/auxin/[01…08]/config/name string [12]
/auxin/[01…08]/config/icon int [1, 74]
/auxin/[01…08]/config/color enum Int with value [0…15] representing
{OFF, RD, GN, YE, BL, MG, CY, WH, OFFi, RDi, GNi, YEi, BLi, MGi, CYi, WHi}
/auxin/[01…08]/config/source int Int with value [0…64] representing
{OFF, In01…32,Aux 1…6,USB L, USB R, Fx 1L…Fx4R, Bus 01…16}
_
/auxin/[01…08]/preamp/trim linf [-18.000, 18.000, 0.250] dB
/auxin/[01…08]/preamp/invert enum {OFF, ON}


AuxIn - EQ setup
Path Type Range Units
/auxin/[01…08]/eq/on enum {OFF, ON}
/auxin/[01…08]/eq/[1…4]/type enum {Lcut, LShv, PEQ, VEQ, HShv, Hcut}
/auxin/[01…08]/eq/[1…4]/f logf [20.000, 20000, 201] Hz/dB
/auxin/[01…08]/eq/[1…4]/g linf [-15.000, 15.000, 0.250]
/auxin/[01…08]/eq/[1…4]/q logf [10.000, 0.315, 72]


AuxIn - mix setup
Path Type Range Units
/auxin/[01…08]/mix/on enum {OFF, ON}
/auxin/[01…08]/mix/fader level [0.0…1.0(+10dB), 1024]
/auxin/[01…08]/mix/st enum {OFF, ON}
/auxin/[01…08]/mix/pan linf [-100.000, 100.000, 2.000]
/auxin/[01…08]/mix/mono enum {OFF, ON}
/auxin/[01…08]/mix/mlevel level [0.0…1.0 (+10 dB), 161]
/auxin/[01…08]/mix/[01…16]/on enum {OFF, ON}
/auxin/[01…08]/mix/[01…16]/level level [0.0…1.0 (+10 dB), 161]
/auxin/[01…08]/mix/[01,03...15]/pan linf [-100.000, 100.000, 2.000]
/auxin/[01…08]/mix/[01,03...15]/type enum {IN/LC, <-EQ, EQ->, PRE, POST, GRP}


AuxIn - DCA & Mute group setup
Path Type Range Units
/auxin/[01…08]/grp/dca int [0, 255] (bitmap)
/auxin/[01…08]/grp/mute int [0, 63] (bitmap)


Other Server ↔ Client communications