Difference between revisions of "How to setup an X32 Rack as an S16"

From behringerwiki
Jump to: navigation, search
 
(22 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
Return to [[FAQ]] >> [[X32 Rack Specific FAQ]]
  
The X32 Rack can be setup to function as an S16, (either as first or second S16). These instructions are for firmware version 2 (or newer) which introduced the XLR out tab of the Routing screen to allow outputs from FOH X32 to be redirected to the Rack outputs directly.
 
  
 +
The X32 Rack can be configured to function in various ways.
  
'''Initial setup'''
+
The following configures the Rack to function as an S16 stagebox, including Ultranet output.
* Connect the AES50 cable from FOH to the AES50-A port of the Rack.
+
* If an S16 is added, set the S16 in mode 1 and connect the AES50 cable from the S16 AES50-A port to the Rack AES50-B port.  
+
* Goto the Routing screen of the Rack
+
  
 +
== Initial Setup ==
  
'''X32 Rack as a first S16'''  [[X32 Rack as a first S16]]
+
* AES50 cable from FOH to Rack - FOH port A to Rack port A
 +
* AES50 cable from Rack to S16 (if connected) - Rack port B to S16 port A
 +
* S16 (if connected) is in mode 1
 +
* Synchronization on Rack is set to AES50A
 +
* Rack HA Remote Preamp - set to AES50A
  
'''X32 Rack as a second S16'''  [[X32 Rack as a second S16]]
 
  
'''HA Preamp setup'''  [[HA Remote Preamp Setup]]
+
To setup FOH to receive Rack inputs as 17-32
 +
 
 +
FOH Routing, Home
 +
* Inputs 17-24 -> AES50 A1-8
 +
* Inputs 25-32 -> AES50 A9-16
 +
 
 +
== Options ==
 +
 
 +
  [[X32 Rack as a first S16]]
 +
  [[X32 Rack as a second S16]]
 +
  [[Ultranet transfer to X32 Rack]]
 +
 
 +
 
 +
Return to [[FAQ]] >> [[X32 Rack Specific FAQ]]

Latest revision as of 23:20, 8 August 2014

Return to FAQ >> X32 Rack Specific FAQ


The X32 Rack can be configured to function in various ways.

The following configures the Rack to function as an S16 stagebox, including Ultranet output.

Initial Setup

  • AES50 cable from FOH to Rack - FOH port A to Rack port A
  • AES50 cable from Rack to S16 (if connected) - Rack port B to S16 port A
  • S16 (if connected) is in mode 1
  • Synchronization on Rack is set to AES50A
  • Rack HA Remote Preamp - set to AES50A


To setup FOH to receive Rack inputs as 17-32

FOH Routing, Home

  • Inputs 17-24 -> AES50 A1-8
  • Inputs 25-32 -> AES50 A9-16

Options

 X32 Rack as a first S16
 X32 Rack as a second S16
 Ultranet transfer to X32 Rack


Return to FAQ >> X32 Rack Specific FAQ