Difference between revisions of "How to setup an X32 Rack as an S16"

From behringerwiki
Jump to: navigation, search
Line 1: Line 1:
The X32 Rack can be configured to function in many different ways.  
+
The X32 Rack can be configured to function in various ways.  
  
One of these configurations allow it to function as an S16.
+
The following configures the Rack to function as an S16 stagebox.
 
+
These instructions are for firmware version 2 (or newer) which introduced the XLR out tab of the Routing screen to allow outputs from FOH X32 to be redirected to the Rack outputs directly.  
+
  
 
== Initial Setup ==
 
== Initial Setup ==
  
* Connect the AES50 cable from FOH to the AES50-A port of the Rack.
+
* AES50 cable from FOH to Rack - FOH port A to Rack port A
* Set the sycnronization (Setup, config screen) to AES50A.
+
* AES50 cable from Rack to S16 (if connected) - Rack port B to S16 port A
* If an S16 is added, set the S16 in mode 1 and connect the AES50 cable from the S16 AES50-A port to the Rack AES50-B port.
+
* S16 (if connected) is in mode 1
 +
* Sycronization on Rack is set to AES50A
 +
* Rack HA Remote Preamp - set to AES50A
  
 
== Options ==
 
== Options ==
Line 16: Line 16:
  
 
* [[X32 Rack as a second S16]]
 
* [[X32 Rack as a second S16]]
 
* [[HA Remote Preamp Setup]]
 
  
 
* [[Ultranet transfer to X32 Rack]]
 
* [[Ultranet transfer to X32 Rack]]

Revision as of 10:45, 9 May 2014

The X32 Rack can be configured to function in various ways.

The following configures the Rack to function as an S16 stagebox.

Initial Setup

  • AES50 cable from FOH to Rack - FOH port A to Rack port A
  • AES50 cable from Rack to S16 (if connected) - Rack port B to S16 port A
  • S16 (if connected) is in mode 1
  • Sycronization on Rack is set to AES50A
  • Rack HA Remote Preamp - set to AES50A

Options