How to setup an X32 Rack as an S16

From behringerwiki
Jump to: navigation, search

The X32 Rack can be configured to function in many different ways.

One of these configurations allow it to function as an S16.

These instructions are for firmware version 2 (or newer) which introduced the XLR out tab of the Routing screen to allow outputs from FOH X32 to be redirected to the Rack outputs directly.

Initial Setup

  • Connect the AES50 cable from FOH to the AES50-A port of the Rack.
  • Set the sycnronization (Setup, config screen) to AES50A.
  • If an S16 is added, set the S16 in mode 1 and connect the AES50 cable from the S16 AES50-A port to the Rack AES50-B port.

Options