Difference between revisions of "MediaWiki:Sidebar"

From behringerwiki
Jump to: navigation, search
Line 250: Line 250:
 
* FAQ
 
* FAQ
 
** How to setup an X32 Rack as an S16 | X32 Rack as an S16
 
** How to setup an X32 Rack as an S16 | X32 Rack as an S16
 +
** X32 Console Specific FAQ | X32 Console Specific
 
**
 
**
 
* SEARCH
 
* SEARCH
 
* LANGUAGES
 
* LANGUAGES

Revision as of 05:27, 4 June 2014

  • navigation
    • X32 WIKI Instructions | Wiki Instructions
  • X32 Manual
    • mainpage|Introduction
    • Operational Overview|1 Operational Overview
    • Channel Strip|2.1 Channel Strip
    • Input Channel Banks|2.2 Input Channel Banks
    • Display and Monitoring|2.3 Display and Monitoring
    • Group/Bus Banks|2.4 Group/Bus Banks
    • Scenes, Assign, Mute Groups|2.5 Scenes, Assign, Mute Groups
    • Rear Panel Connections|2.6 Rear Panel Connections
    • Hook-Up Diagrams|3.1 Hook-Up Diagrams
    • FX Descriptions|4.1 FX Descriptions
    • Starting up, shutting down, and firmware updates| 5.1 Starting up, shutting down, and firmware updates
    • Default setup for connecting to monitoring and P.A. systems|5.2 Default setup for connecting to monitoring and P.A. systems
    • How do I connect a microphone, process its signal and send it out to the P.A. system?|5.3 How do I connect a microphone, process its signal and send it out to the P.A. system?
    • How do I add one of the 8 internal effects to the sound?|5.4 How do I add one of the 8 internal effects to the sound?
    • How do I use an outboard effects processor?|5.5 How do I use an outboard effects processor?
    • How do I set up live stage monitoring?|5.6 How do I set up live stage monitoring?
    • Everything you ought to know about Solo and monitor sources|5.7 Everything you ought to know about Solo and monitor sources
    • Using Mute Groups|5.8 Using Mute Groups
    • Mix Buses, Sub Groups and DCA Groups|5.9 Mix Buses, Sub Groups and DCA Groups
    • User Assignable control section|5.10 User Assignable control section
    • How do I share signals over AES50 Supermac network?|5.11 How do I share signals over AES50 Supermac network?
    • AES50 cabling requirements|5.12 AES50 cabling requirements
    • What kinds of Utilities are available?|5.13 What kinds of Utilities are available?
    • How do I set up a Matrix for a delay column/tower or a remote zone mix?|5.14 How do I set up a Matrix for a delay column/tower or a remote zone mix?
    • Using the X32 in recording and production studio environments|5.15 Using the X32 in recording and production studio environments
    • Remote control|5.16 Remote control
    • Recording a 2-track directly with the console|5.17 Recording a 2-track directly with the console
    • Saving and recalling scenes|5.18 Saving and recalling scenes


    • Configuring the X-USB card for use in the console|6.1 Configuring the X-USB card for use in the console
    • Configuring the PC to Interface with the X-USB Card|6.2 Configuring the PC to Interface with the X-USB Card
    • X-USB Specifications|6.3 X-USB Specifications


    • Display and Navigation Controls|7.1.1 Display and Navigation Controls
    • Console Screens|7.1.2 Console Screens
    • Navigation Methods|7.1.3 Navigation Methods
    • Home Screen|7.2 Home Screen
    • Meters Screen|7.3 Meters Screen
    • Routing Screen|7.4 Routing Screen
    • Setup Screen|7.5 Setup Screen
    • Libraries Screen|7.6 Libraries Screen
    • Effects Screen|7.7 Effects Screen
    • Mute Groups Screen|7.8 Mute Groups Screen
    • Utility Screen|7.9 Utility Screen
    • Monitor/Talkback Screens|7.10 Monitor/Talkback Screens
    • USB Screen|7.11 USB Screen
    • Assign Screen|7.12 Assign Screen
    • Scenes Screen|7.13 Scenes Screen
    • Specifications | Specifications
    • Block Diagram| Block Diagram
    • MIDI Implementation | MIDI Implementation
    • Dimensions | Dimensions


  • X32 COMPACT Manual
    • X32 COMPACT: Introduction
    • X32 COMPACT: Operational Overview | 1. Operational Overview
    • X32 COMPACT: Callouts | 2. Callouts
    • X32 COMPACT: Hook-Up Diagrams | 3. Hook-Up Diagrams
    • X32 COMPACT: FX Descriptions | 4. FX Descriptions
    • X32 COMPACT: Starting up, shutting down, and firmware updates | 5.1 Starting up, shutting down, and firmware updates
    • X32 COMPACT: Default setup for connecting to monitoring and P.A. systems | 5.2 Default setup for connecting to monitoring and P.A. systems
    • X32 COMPACT: How do I connect a microphone, process its signal and send it out to the P.A. system? | 5.3 How do I connect a microphone, process its signal and send it out to the P.A. system?
    • X32 COMPACT: How do I add one of the 8 internal effects to the sound? | 5.4 How do I add one of the 8 internal effects to the sound?
    • X32 COMPACT: How do I use an outboard effects processor? | 5.5 How do I use an outboard effects processor?
    • X32 COMPACT: How do I set up live stage monitoring? | 5.6 How do I set up live stage monitoring?
    • X32 COMPACT: Everything you ought to know about Solo and monitor sources | 5.7 Everything you ought to know about Solo and monitor sources
    • X32 COMPACT: Using Mute Groups | 5.8 Using Mute Groups
    • X32 COMPACT: Mix Buses, Sub Groups and DCA Groups | 5.9 Mix Buses, Sub Groups and DCA Groups
    • X32 COMPACT: User Assignable control section | 5.10 User Assignable control section
    • X32 COMPACT: How do I share signals over AES50 Supermac network? | 5.11 How do I share signals over AES50 Supermac network?
    • X32 COMPACT: AES50 cabling requirements | 5.12 AES50 cabling requirements
    • X32 COMPACT: What kinds of Utilities are available? | 5.13 What kinds of Utilities are available?
    • X32 COMPACT: How do I set up a Matrix for a delay column/tower or a remote zone mix? | 5.14 How do I set up a Matrix for a delay column/tower or a remote zone mix?
    • X32 COMPACT: Using the X32 COMPACT in recording and production studio environments | 5.15 Using the X32 COMPACT in recording and production studio environments
    • X32 COMPACT: Remote control | 5.16 Remote control
    • X32 COMPACT: Recording a 2-track directly with the console | 5.17 Recording a 2-track directly with the console
    • X32 COMPACT: Saving and recalling scenes | 5.18 Saving and recalling scenes
    • X32 COMPACT: USB Interface Operation Guide | 6. USB Interface Operation Guide
    • X32 COMPACT: Configuring the X-USB card for use in the console | 6.1 Configuring the X-USB card for use in the console
    • X32 COMPACT: Configuring the PC to Interface with the X-USB Card | 6.2 Configuring the PC to Interface with the X-USB Card
    • X32 COMPACT: X-USB Specifications | 6.3 X-USB Specifications
    • X32 COMPACT: Display and Navigation Controls | Main Display Overview
    • X32 COMPACT: Home Screen | 7.2 Home Screen
    • X32 COMPACT: Meters Screen | 7.3 Meters Screen
    • X32 COMPACT: Routing Screen | 7.4 Routing Screen
    • X32 COMPACT: Setup Screen | 7.5 Setup Screen
    • X32 COMPACT: Libraries Screen | 7.6 Library Screen
    • X32 COMPACT: Effects Screen | 7.7 Effects Screen
    • X32 COMPACT: Mute Group Screen | 7.8 Mute Group Screen
    • X32 COMPACT: Utility Screen | 7.9 Utility Screen
    • X32 COMPACT: Monitor/Talkback Screens | 7.10 Monitor/Talkback Screen
    • X32 COMPACT: USB Screen | 7.11 USB Screen
    • X32 COMPACT: Assign Screen | 7.12 Assign Screen
    • X32 COMPACT: Scenes Screen | 7.13 Scenes Screen
    • X32 COMPACT: Specifications | 8. Specifications
    • X32 COMPACT: Block Diagram | Block Diagram
    • X32 COMPACT: MIDI Implementation | MIDI Implementation
    • X32 COMPACT: Dimension | Dimensions


  • X32 PRODUCER Manual
    • X32 PRODUCER: Introduction
    • X32 PRODUCER: Operational Overview | 1. Operational Overview
    • X32 PRODUCER: Callouts | 2. Callouts
    • X32 PRODUCER: Hook-Up Diagrams | 3. Hook-Up Diagrams
    • X32 PRODUCER: FX Descriptions | 4. FX Descriptions
    • X32 PRODUCER: Starting up, shutting down,and firmware updates | 5.1 Starting up, shutting down,and firmware updates
    • X32 PRODUCER: Default setup for connecting to monitoring and P.A. systems | 5.2 Default setup for connecting to monitoring and P.A. systems
    • X32 PRODUCER: How do I connect a microphone, process its signal and send it out to the P.A. system? | 5.3 How do I connect a microphone, process its signal and send it out to the P.A. system?
    • X32 PRODUCER: How do I add one of the 8 internal effects to the sound? | 5.4 How do I add one of the 8 internal effects to the sound?
    • X32 PRODUCER: How do I use an outboard effects processor? | 5.5 How do I use an outboard effects processor?
    • X32 PRODUCER: How do I set up live stage monitoring? | 5.6 How do I set up live stage monitoring?
    • X32 PRODUCER: Everything you ought to know about Solo and monitor sources | Everything you ought to know about Solo and monitor sources
    • X32 PRODUCER: Using Mute Groups | 5.8 Using Mute Groups
    • X32 PRODUCER: Mix Buses, Sub Groups and DCA Groups | 5.9 Mix Buses, Sub Groups and DCA Groups
    • X32 PRODUCER: User Assignable control section | 5.10 User Assignable control section
    • X32 PRODUCER: How do I share signals over AES50 Supermac network? | 5.11 How do I share signals over AES50 Supermac network?
    • X32 PRODUCER: AES50 cabling requirements | 5.12 AES50 cabling requirements
    • X32 PRODUCER: What kinds of Utilities are available? | 5.13 What kinds of Utilities are available?
    • X32 PRODUCER: How do I set up a Matrix for a delay column/tower or a remote zone mix? | 5.14 How do I set up a Matrix for a delay column/tower or a remote zone mix?
    • X32 PRODUCER: Using the X32 Producer in recording and production studio environments | 5.15 Using the X32 Producer in recording and production studio environments
    • X32 PRODUCER: Remote Control | 5.16 Remote Control
    • X32 PRODUCER: Recording a 2-track directly with the console | 5.17 Recording a 2-track directly with the console
    • X32 PRODUCER: Saving and recalling scenes | 5.18 Saving and recalling scenes
    • X32 PRODUCER: USB Interface Operation Guide | 6. USB Interface Operation Guide
    • X32 PRODUCER: Configuring the X-USB card for use in the console | 6.1 Configuring the X-USB card for use in the console

X32 PRODUCER: Configuring the PC to Interface with the X-USB Card | 6.2 Configuring the PC to Interface with the X-USB Card

    • X32 PRODUCER: X-USB Specifications | 6.3 X-USB Specifications
    • X32 PRODUCER: Main Display Overview | Main Display Overview
    • X32 PRODUCER: Home Screen | 7.2 Home Screen
    • X32 PRODUCER: Meters Screen | 7.3 Meters Screen
    • X32 PRODUCER: Routing Screen | 7.4 Routing Screen
    • X32 PRODUCER: Libraries Screen | 7.5 Libraries Screen
    • X32 PRODUCER: Effects Screen | 7.6 Effects Screen
    • X32 PRODUCER: Setup Screen | 7.7 Setup Screen
    • X32 PRODUCER: Monitor/Talkback Screens | 7.8 Monitor/Talkback Screens
    • X32 PRODUCER: Scenes Screen | 7.9 Scenes Screen
    • X32 PRODUCER: Mute Group Screen | 7.10 Mute Group Screen
    • X32 PRODUCER: Utility Screen | 7.11 Utility Screen
    • X32 PRODUCER: USB Screen | 7.12 USB Screen
    • X32 PRODUCER: Specifications | 8. Specifications
    • X32 PRODUCER: Block Diagram | Block Diagram
    • X32 PRODUCER: MIDI Implementation | MIDI Implementation
    • X32 PRODUCER: Dimensions | Dimensions



  • X32 RACK Manual
    • X32 RACK: Introduction | Introduction
    • X32 RACK: Operational Overview | 1. Operational Overview
    • X32 RACK: Callouts | 2. Callouts
    • X32 RACK: Hook-up Diagrams | 3. Hook-up Diagrams
    • X32 RACK: FX Descriptions | 4. FX Descriptions
    • X32 RACK: Starting up, shutting down, and firmware updates | 5.1 Starting up, shutting down,and firmware updates
    • X32 RACK: Default setup for connecting to monitoring and P.A. systems | 5.2 Default setup for connecting to monitoring and P.A. systems
    • X32 RACK: How do I connect a microphone, process its signal and send it out to the P.A. system? | 5.3 How do I connect a microphone, process its signal and send it out to the P.A. system?
    • X32 RACK: How do I add one of the 8 internal effects to the sound? | 5.4 How do I add one of the 8 internal effects to the sound?
    • X32 RACK: How do I use an outboard effects processor? | 5.5 How do I use an outboard effects processor?
    • X32 RACK: How do I set up live stage monitoring? | 5.6 How do I set up live stage monitoring?
    • X32 RACK: Everything you ought to know about Solo and monitor sources | 5.7 Everything you ought to know about Solo and monitor sources
    • X32 RACK: How do I share signals over AES50 Supermac network? | 5.8 How do I share signals over AES50 Supermac network?
    • X32 RACK: AES50 cabling requirements | 5.9 AES50 cabling requirements
    • X32 RACK: What kinds of Utilities are available? | 5.10 What kinds of Utilities are available?
    • X32 RACK: Using the X32 RACK in recording and production studio environments | 5.11 Using the X32 RACK in recording and production studio environments
    • X32 RACK: Remote control | 5.12 Remote control
    • X32 RACK: Recording a 2-track directly with the console | 5.13 Recording a 2-track directly with the console
    • X32 RACK: Saving and recalling scenes | 5.14 Saving and recalling scenes
    • X32 RACK: USB Interface Operation Guide | 6. USB Interface Operation Guide
    • X32 Rack: Configuring the X-USB card for use in the console | 6.1 Configuring the X-USB card for use in the console
    • X32 RACK: Configuring the PC to Interface with the X-USB Card | 6.2 Configuring the PC to Interface with the X-USB Card
    • X32 RACK: X-USB Specifications | 6.3 X-USB Specifications
    • X32 RACK: Display and Navigation Controls | 7.1.1 Display and Navigation Controls
    • X32 RACK: Console Screens | 7.1.2 Console Screens
    • X32 RACK: Navigation Methods | 7.1.3 Navigation Methods
    • X32 RACK: Home Screen | 7.2 Home Screen
    • X32 RACK: Meters Screen | 7.3 Meters Screen
    • X32 RACK: Routing Screen | 7.4 Routing Screen
    • X32 RACK: Libraries Screen | 7.5 Libraries Screen
    • X32 RACK: Effects Screen | 7.6 Effects Screen
    • X32 RACK: Setup Screen | 7.7 Setup Screen
    • X32 RACK: Monitor/Talkback Screens | 7.8 Monitor/Talkback Screens:
    • X32 RACK: Scenes Screen | 7.9 Scenes Screen
    • X32 RACK: Mute Group Screen | 7.10 Mute Group Screen
    • X32 RACK: Utilities Screen | 7.11 Utility Screen
    • X32 RACK: USB Screen | 7.12 USB Screen
    • X32 RACK: Specifications | Specifications
    • X32 RACK: Block Diagram | Block Diagram
    • X32 RACK: MIDI Implementation | MIDI Implementation


  • X32 CORE Manual
    • X32 CORE: Introduction | Introduction
    • X32 CORE: Callouts | 1. Callouts
    • X32 CORE: Hook-up | 2. Hook-up Diagrams
    • X32 CORE: Select Knob Functions | 3.Select Knob Functions
    • X32 CORE: FX Descriptions | FX Descriptions
    • X32 CORE: Firmware updates | 5.1 Firmware Updates
    • X32 CORE: Remote Control | 5.2 Remote Control
    • X32 CORE: Recording a 2-track directly with the console | 5.3 Recording a 2-track directly with the console
    • X32 CORE: Saving and Recalling Scenes | 5.4 Saving and recalling a scene
    • X32 CORE: How do I add one of the 8 internal effects to the sound? | 5.5 How do I add one of the 8 internal effects to the sound?
    • X32 CORE: USB Interface Operation Guide | 6. USB Interface Operation Guide
    • X32 CORE: Configuring the X-USB card for use in the console | 6.1 Configuring the X-USB card for use in the console
    • X32 CORE: Configuring the PC to Interface with the X-USB Card | 6.2 Configuring the PC to Interface with the X-USB Card
    • X32 CORE: Configuring the PC to Interface with the X-USB Card | 6.3 Configuring the PC to Interface with the X-USB Card
    • X32 CORE: Specifications | 7. Specifications
    • X32 CORE: Block Diagram | Block Diagram
    • X32 CORE: X32 MIDI Implementation | X32 MIDI Implementation


  • V2.0 Firmware
    • V2.0 Firmware: Scene/Snippet/Cue Management | Scene/Snippet/Cue Management
    • V2.0 Firmware: RTA and EQ Functions | RTA and EQ Functions
    • V2.0 Firmware: Library Functions | Library Functions
    • V2.0 Firmware: Channel Spill Out for X32 COMPACT and PRODUCER | V2.0 Channel Spill Out for X32 COMPACT and PRODUCER
    • V2.0 Firmware: Gain Splitting and Remote Control | Gain Splitting and Remote Control for COMPACT and PRODUCER
    • V2.0 Firmware: New Effects Programs | New Effects Programs
    • V2.0 Routing and Patching | Routing and Patching
    • V2.0 MIDI Implementation | MIDI Implementation
    • V2.0 Firmware: Expansion Card Support | Expansion Card Support
    • V2.0 Firmware: iQ Series Speaker Support | iQ Series Speaker Support
    • V2.0 Firmware: New Feature points | New Feature points


  • S16 Digital Snake
    • S16: Introduction|Introduction
    • S16: Callouts|Callouts
    • S16: Hookup Diagrams|Hookup Diagrams
    • S16: Configuring the S16|Configuring the S16
    • S16: Standard Operation|Standard Operation
    • S16: Cascaded Operation|Cascaded Operation
    • S16: Standalone Operation|Standalone Operation
    • S16: MIDI Communication|MIDI Communications
    • S16: Specifications|Specifications
  • FAQ
    • How to setup an X32 Rack as an S16 | X32 Rack as an S16
    • X32 Console Specific FAQ | X32 Console Specific
  • SEARCH
  • LANGUAGES
Retrieved from "https://behringerwiki.musictribe.com/index.php?title=MediaWiki%3ASidebar&oldid=839"